User manual

Adjusting the water softener
Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l Clarke
degrees
Level
47 - 50 84 - 90 8.4. - 9.0 58 - 63 10
43 - 46 76 - 83 7.6 - 8.3 53 - 57 9
37 - 42 65 - 75 6.5 - 7.5 46 - 52 8
29 - 36 51 - 64 5.1 - 6.4 36 - 45 7
23 - 28 40 - 50 4.0 - 5.0 28 - 35 6
19 - 22 33 - 39 3.3 - 3.9 23 - 27
5
1)
15 - 18 26 - 32 2.6 - 3.2 18 - 22 4
11 - 14 19 - 25 1.9 - 2.5 13 - 17 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 2
< 4 < 7 < 0.7 < 5
1
2)
1) Factory position.
2) Do not use salt at this level.
How to adjust the level of the water
softener
1. Turn the knob counterclockwise until
the symbol of the first programme is
aligned with the on/off indicator . Make
sure that the appliance is in setting
mode.
2. Press and hold the start button until the
start indicator, the on/off indicator and
start to flash.
•
The intermittent flashing of
refers
to the current set level, e.g. 5 flashes
+ pause + 5 flashes = level 5.
3. Press the start button again and again
to change the setting. Each time you
press the start button the level number
increases.
4. To confirm the setting and deactivate
the appliance, turn the knob until the
programme marker is aligned with the
on/off indicator.
28 progress