User manual

PROGRAMMES
Programme Degree of
soil
Type of load
Programme
phases
Consumption values
1)
Dura‐
tion
(min)
Energy
(kWh)
Water
(l)
2)
Normal soil
Crockery and
cutlery
• Pre-wash
• Wash 50 °C
• Rinses
• Dry
227 1.039 11
Normal soil
Crockery and
cutlery
• Pre-wash
• Wash 65 °C
• Rinses
• Dry
130 -
140
1.4 - 1.6 15-17
3)
Fresh soil
Crockery and
cutlery
• Wash 60 °C
or 65 °C
• Rinses
30 0.8 10
1)
The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity
of dishes can change the values.
2)
With this programme you have the most efficient use of water and energy consumption for crockery and cutlery
with normal soil. (Also, it is a standard programme for test institutes).
3)
With this programme you can wash a load with fresh soil. It gives good washing results in a short period of
time.
Information for test institutes
For all the necessary information for test
performance, send an email to:
[e-mail]
Write down the product number (PNC)
that is on the rating plate.
SETTINGS
Programme selection mode and
user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
Settings available in the user mode:
• The level of water softener according to
the water hardness.
• Activation or deactivation of AirDry.
As the appliance stores the saved
settings, there is no need to configure
it before every cycle.
How to set the programme
selection mode
The appliance is in programme selection
mode when the on/off indicator is on and
Start indicator flashes.
After activation, the appliance is in
programme selection mode by default. If
not, set the programme selection mode
the following way:
Press and hold simultaneously Start and
Delay until the appliance is in programme
selection mode.
44 Progress