Operation Manual

Indicator lights
Wash Comes on when a washing programme is set and
remains on for all the duration of the washing pro-
gramme.
Goes off when the washing programme has
ended.
End Comes on when a washing programme has
ended. It also has added functions of visual sig-
nalling as:
– the setting of the water softener,
– activation/deactivation of the rinse aid dispens-
er,
– intervention of an alarm due to the malfunction
of the machine.
Multitab function Indicates the activation/deactivation of the "Multi-
tab function" (see "Multitab function").
Salt
1)
Comes on when the special salt has run out.
Rinse aid
1)
Comes on when the rinse aid has run out.
1) The salt and rinse aid indicator lights never come on while a washing programme is running even if
filling with salt and/or rinse aid is necessary.
Setting mode
The appliance is in setting mode when the
On/Off light is on and all programme
lights are off.
Important! Always remember that when
performing operations such as:
• selecting a washing programme or a delay
start
• setting the water softener
• activating/deactivating the rinse aid
the appliance MUST be in setting mode.
If a programme light is illuminated, the last
performed programme is still set.
In this case the programme has to be can-
celled:
1. Press and hold simultaneously function
buttons B and C until all programme
lights are off.
2. Release function buttons B and C.
To cancel a set programme or a
programme in progress
Simultaneously press and hold the two Can-
cel buttons B and C until all the programme
button lights are off. The programme has
been cancelled and the machine is now in
setting mode.
First use
Before using your dishwasher for the first
time:
• Ensure that the electrical and water con-
nections comply with the installation in-
structions
• Remove all packaging from inside the ap-
pliance
• Set the water softener level
• Pour 1 litre of water into the salt container
and then fill with dishwasher salt
• Fill the rinse aid dispenser
If you want to use combi detergent
tablets such as: ''3 in 1'', ''4 in 1'', ''5
in 1'' etc... set the Multitab function.
(See ''Multitab function'').
72 progress