Owner manual

C2000
Program & Report
‚ 22
the display.
Press
<ENTER>
to advance the menu. The display will now
prompt an entry for
correct data bit
selection. Press the
<SELECT>
key until the desired data bit selection appears in
the display.
Again, press
<ENTER>
to advance the menu. Here, the
display prompts an entry for
correct stop bit
selection. Press
the
<SELECT>
key until the desired stop bit selection appears
in the display.
Press
<ENTER>
again to advance the menu. The display will
prompt an entry for
correct parity
selection. Press the
<SELECT>
key until the desired parity selection appears in
the display. If parity is enabled, press
<ENTER>
to advance to
parity type menu. At this point the display will show
odd
parity
. To toggle to
even parity
, press
<SELECT>
key.
To review your selections for the serial port, simply press
<ENTER>
and scroll through all of the port parameters.
Mode 5 may be exited by pressing the
<MANAGER>
key.
The C2000 will return to the mode entry prompt on the display.
To exit programming mode completely and return to operator
mode, press the
<MANAGER>
key.