Owner manual

C2000

Program & Report

‚ 28

Select the report number and enter it on the C2000 keypad; then

press

<ENTER>

. Data for the report will be printed. If you

wish to print additional reports, select another report option. Or

press

to exit Mode 11.

Mode 12 — Clear Resettable Totals

(Manager/Operator)

Mode 12 is used to reset resettable totals by clearing them to

zero. Enter

<12>

and press

<ENTER>

to enter Mode 12.

The display will show

press clear

. If you wish to zero all

resettable totals, proceed by pressing

<CLEAR>

Press any key to exit Mode 12.

Mode 97 — Program Operator PIN Code

(Manager only)

WARNING: Care should be observed when using this mode.

If the PIN Code is altered, be sure to make note of the new PIN

Code and save in a safe location.

In Mode 97, the Operator PIN Code is viewed and changed.

(The default Operator PIN Code is

1111

.) To enter this mode,

enter

<97>

on the numeric keypad and press

<ENTER>

. The

display will show the existing Operator PIN Code. To change

the code, enter the new number (up to 4 digits) on the numeric

keypad and press

<ENTER>

. The new Operator PIN code will

appear on the display. To exit this mode, press the

key.