User guide

SECTION 1. TECHNICAL SPECIFICATIONS
1-7
OVERHEAT SENSOR
• Lubricate o-ring with o-ring lubricant
• Torque senor to 500±50 in/lbs (56±5.6 Nm)
TEMPERATURE SENSOR
• Lubricate o-ring with o-ring lubricant
• Torque senor to 25±3 in/lbs (2.8±0.3 Nm)
AIR FILTER
• Torque cap screw to 50±5 in/lbs (5.6±0.6 Nm)
BLOWER ASSEMBLY
• Apply anti-seize to bolts (4)
• Torque bolts (4) to 25±3 in/lbs (2.8±0.3 Nm)
PROHEAT CONTROL MODULE (PCM)
• Apply anti-seize to bolts (3)
• Torque bolts (3) to 75±7 in/lbs (8.5±0.8 Nm)