User guide

3-5
Figure 3-10 X45 Mounting Plate Dimensions & Exhaust Hole
SECTION 3. INSTALLATION
OPTION B – Heater Without Enclosure
Heater supplied without an enclosure (mount in an existing enclosure on the
vehicle ie. tool box). Heater supplied with an auxiliary mounting plate.
1
. Ensure that the proposed enclosure is big enough for the heater.
12
1
⁄2W x 11H x 20
1
⁄2L inches (318 x 280 x 521 mm)
2
. Using the indicated dimensions, drill the (4) mounting holes
and exhaust pipe clearance hole.
3. Ensure that the combustion tube can be removed for service.
See Figure 1-2 on page 1-3 for service space requirements.
2.02"
(51 mm)
3" (76 mm) Dia.
5.5"
(140 mm)
1.0" (25 mm)
8.5" (216 mm)
5"
(127 mm)
5" (127 mm)
7.5" (191 mm)
4 X .38" (10MM)
MOUNTING HOLES
6.4"
(163mm)
3.2.2
NOTICE
Use anti-seize compound on fasteners
to prevent galling and corrosion.