Quick Start Guide

What’s in the box?
(1) Dreamweaver Shine Sound Soothing Projector
(1) Power Adapter
Power the Dreamweaver Shine
The Dreamweaver Shine offers 2 options for power:
• power adapter
• 3 AAA batteries (not included)
Dreamweaver Shine,
back
To use the power adapter: Plug
the power adapter into the DC
IN 6V jack on the back of the
Dreamweaver Shine. Plug the
other end of the power adapter
into a working outlet or surge
protector.
To use batteries: Use a athead
screwdriver (not included) to unlatch
the battery door on the bottom of
the Dreamweaver Shine.
Remove the battery door and insert
3 AAA batteries (not included) into
the battery compartment. (Match
the polarity signs on the inside of the
compartment!)
Place the battery door back on the bottom of the
Dreamweaver Shine. Screw the battery door latch back into
place to lock the door.
IMPORTANT: NEVER place the Dreamweaver Shine or cords
of any kind inside the crib. NEVER place the Dreamweaver
Shine or cords within reach of children. THIS IS NOT A TOY.
Dreamweaver Shine,
bottom
Battery door
Door latch screw
Everyday use
PLAYING SOUNDS
The Dreamweaver Shine offers a variety of soothing lullabies
and nature sounds, as well as white noise, to calm baby.
To cycle through these sounds: Press
the
button on the front of the
Dreamweaver Shine. Each press goes
to a different selection.
To adjust the volume: Press the
VOLUME + or – button.
To turn sounds off: Press and hold
the button on the front of the
Dreamweaver Shine.
Dreamweaver Shine,
front
USING THE PROJECTOR
To turn the projector on: Press the
button on the front of the projector.
To adjust brightness of the projector
(or turn it off): Press the
button
repeatedly to cycle through the
settings (low, high, and off).
Dreamweaver Shine,
front