Quick Start Guide

STEP 2: PLACE THE CAMERA

Position the camera

Find a location for the camera that gives you the best

view of your baby in his or her crib. Place the camera on

a at surface, like a dresser or shelf, or mount the camera

to a wall using the keyhole slots on its bottom (see the

mounting template included in this package).

Test your WiFi signal

Your Project Nursery Smart Baby WiFi Camera needs a

strong enough signal from your WiFi router to send its

video signal. Here’s how to test for signal strength.

First, go to where you want to put the camera. Make sure

your smartphone or other portable wireless device is

connected to the WiFi network you want to test. Then look

at the WiFi icon on your device screen to see the strength

of the connection.

For best results, look for a location with at least 50%

strength to use the WiFi camera.

IMPORTANT: NEVER place the camera or cords of any

kind inside the crib. NEVER place the camera or cords

within reach of the baby.

IMPORTANT: If you have a dual-band router that uses

different networks for the two bands, make sure the WiFi

signal you use for the camera is 2.4GHz, not 5GHz!