User Manual

15
Tour of the system
TOUR OF THE SYSTEM
POWER button
(right side) turns
the camera on and
o (press and hold).
Camera (front)
Nighttime sensor adjusts
the camera sensitivity to the
amount of ambient light.
Microphone picks up sound
around the camera.
Camera (back)
DC In jack plugs into your power
cable to power the camera.
Indicator light shows the power
and connection status of the
camera:
- o (camera not plugged in or
powered on)
- solid red (on but not connected
- blinking red (in the process of
connecting)
- solid green (connected to
network and App)
- blinking green (camera being
actively viewed).
Thermal sensor
detects the
temperature around
the camera.
SET starts the WiFi setup process (press and hold).
QR code passes the camera ID information to the App
during the WiFi setup process.
Mounting keyholes let you
mount the camera on a wall
(mounting screws included).
MICRO-SD slot (left side)
accepts a micro-SD card
(not included) for storage of
automatic photos/video.
Camera (bottom)
Adjustable antenna
communicates
wirelessly with your
WiFi network.