ITEM #0394606 FLUSHMOUNT CEILING FIXTURE MODEL #87822-01 Français p. 8 Español p. 15 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-389-8827, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. 5 p.m., EST, Friday.
PACKAGE CONTENTS A B C PART DESCRIPTION QUANTITY Fixture A 1 Spring claw (preassembled to Fixture (A)) B 1 Glass shade C 1 2
HARDWARE CONTENTS (shown actual size) AA BB CC Long mounting screw Short mounting screw Qty. 2 Qty. 2 DD Wire nut Qty. 3 Mounting bracket (Not actual size) Qty. 1 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING • TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). • MINIMUM 90°C SUPPLY CONDUCTORS.
ASSEMBLY INSTRUCTIONS 1. Tighten the short mounting screws (CC) two full turns into the holes in the mounting bracket (DD). Then fasten mounting bracket (DD) onto the ceiling outlet box (not included) using long mounting screws (BB). 1 Hardware Used DD BB Long mounting screw x2 CC Short mounting screw x2 BB DD Mounting bracket x1 CC 2. Strip 3/4 in. of insulation from wire ends. Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral).
ASSEMBLY INSTRUCTIONS 4. Place the fixture (A) over the outlet box. Allow heads of short mounting screws (CC) to come out through the large ends of the key holes. Twist fixture (A) until heads of short mounting screws (CC) slide into narrow ends of key holes. Tighten short mounting screws (CC) to secure fixture (A). 4 CC A Hardware Used CC Short mounting screw x2 5. Install light bulbs (not included). Use only 60-watt or less standard-base bulbs or 13-watt standard-base CFL bulbs. 5 6.
CARE AND MAINTENANCE • Shut off main power supply before wiping product with damp cloth or window cleaner. Do not use abrasives. • Bulb replacement: Use 60-watt or less standard-base bulbs or 13-watt standard-base CFL bulbs. TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Bulb won’t light. 1. Bulb is burned out. 2. Power is off. 3. Faulty wire connection. 4. Faulty switch. 1. Replace light bulb. 2. Make sure power supply is on. 3. Check wiring. 4. Test or replace switch.
WARRANTY The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for one (1) year from the date of purchase. If within this period the product is found to be defective in material or workmanship, the product must be returned, with a copy of the original sales receipt as proof of purchase in the original carton, to the place of purchase. The manufacturer will, at its option, repair, replace or refund the original purchase price to the consumer.