ITEM #0760194 0760195 LED FLUSHMOUNT CEILING FIXTURES (SET OF 4) Project Source® is a registered trademark of LF, LLC. All Rights Reserved. MODEL #CLL11-4BZ CLL11-4BNK Français p. 10 Español p. 19 ATTACH YOUR RECEIPT HERE Serial Number 5002223 Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-389-8827, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. 5 p.m., EST, Friday. AB15911 Lowes.
PACKAGE CONTENTS PART DESCRIPTION QUANTITY A B Fixture Glass Shade (preassembled to fixture (A)) Mounting Strap Fixture Screw (preassembled to mounting strap (C)) Threaded Rod (preassembled to fixture (A)) Nut (preassembled to threaded rod (E)) Finial (preassembled to threaded rod (E)) 4 4 C D E F G 4 8 A B 4 C 4 4 D E F G HARDWARE CONTENTS (shown actual size) AA E3 Wire Connector Qty. 12 BB Machine Screw Qty. 8 Lowes.
SAFETY INFORMATION READ AND SAVE THESE INSTRUCTIONS. DANGER • For your protection and safety, carefully read and understand the information provided in this manual completely before attempting to assemble, install or operate this product. Failure to do so could lead to electrical shock, fire or other injuries that could be hazardous or even fatal. G • DO NOT connect this fixture to an electrical system that does not provide a means for equipment grounding.
SAFETY INFORMATION CAUTION • TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing the fuse (or switching the circuit breaker off). • If you are not sure the lighting system has a grounding means, DO NOT attempt to install this fixture. Contact a qualified, licensed electrician for information regarding the proper grounding methods as required by the local electrical code in your area.
ASSEMBLY INSTRUCTIONS 2. Remove existing fixtures and disconnect all electrical wiring. 2 Outlet Box 3. Attach mounting strap (C) to outlet box (not included) using existing washers and outlet box screws or the machine screws (BB). NOTE: If the outlet box screws required for your outlet box are of a different size than the machine screws (BB), consult a licensed electrician before proceeding. 3 Outlet Box Tighten machine screws (BB) to secure mounting strap (C) to outlet box.
ASSEMBLY INSTRUCTIONS 4. Remove finial (G) and nut (F) from threaded rod (E). Save finial (G) and nut (F) for later use. 4 A Remove glass shade (B) from fixture (A). A B E F G 5. Prepare wire by stripping 3/4 in. of insulation from wire ends using wire strippers (not included). Connect WHITE wire from fixture (A) to WHITE wire from outlet box using existing wire connector or wire connector (AA).
ASSEMBLY INSTRUCTIONS 6. Wrap electrical tape (not included) around each individual wire connector (AA) down to the wire. 6 WARNING: Make sure no bare wire or wire strands are visible after making connections. AA Carefully arrange excess wiring and wire connectors (AA) within outlet box. Outlet Box AA 7. Align keyslot holes on fixture (A) with fixture screws (D) on mounting strap (C) and push up. Turn fixture (A) clockwise until it no longer turns.
ASSEMBLY INSTRUCTIONS 9. Restore power and test fixtures (A). 9 A If fixtures (A) do not function, please refer to the TROUBLESHOOTING guide on the next page. A CARE AND MAINTENANCE • Shut off main power supply. Wipe fixture with soft, damp cloth. Use window cleaner to clean glass. Do not use an abrasive cleaner on glass or fixture. • Total wattage for each fixture is 14.5 watts; do not attempt to replace the LEDs.
WARRANTY The distributor warrants all of its lighting fixtures against defects in materials and workmanship for five (5) years from the date of purchase. If within this period the product is found to be defective, take a copy of the bill of sale as a proof of purchase and the product in its original carton to the place of purchase. The distributor will, at its option, repair, replace or refund the purchase price to the consumer.
