Installation Guide

ManualsBrandsProject Source ManualsPendant LightingROC91216-18

ITEM #0027782

MINI PENDANT

MODEL #ROC91216-18

Français p. 8

Español p. 15

ATTACH YOUR RECEIPT HERE

AB13351

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-866-389-8827, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. -

5 p.m., EST, Friday.

Serial Number

Purchase Date

Project Source

is a registered trademark

Lowes.com

Summary of content (4 pages)

PAGE 1
ITEM #0027782 MINI PENDANT MODEL #ROC91216-18 Français p. 8 Español p. 15 Project Source® is a registered trademark of LF, LLC. All rights reserved. ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-389-8827, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. 5 p.m., EST, Friday. AB13351 1 Lowes.
PAGE 2
PACKAGE CONTENTS HARDWARE CONTENTS (shown actual size) B AA B BB B CC B DD B EE Mounting screw (preassembled to Crossbar (EE)) Crossbar (Not actual size) Qty. 2 Qty. 1 A Cap nut (preassembled to Mounting screw (DD)) Wire nut Qty. 3 Qty. 2 B Machine screw Qty. 2 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product.
PAGE 3
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 1. Remove cap nuts (AA) from mounting screws (DD). Attach crossbar (EE) to outlet box (not included) using machine screws (CC). Note: The mounting screws (DD) should protrude away from the outlet box. 4. Attach wire nuts (BB). Tape wire nuts (BB) and wires together. 1 4 Hardware Used Hardware Used B Cap nut AA x2 B Machine screw CC x2 B Mounting screw DD x2 B Crossbar EE x1 2. Based on desired length, install stems (B) together.
PAGE 4
ASSEMBLY INSTRUCTIONS WARRANTY 7. Install light bulbs (not included). Use only 60-watt or less standard-base bulbs or 13-watt standard-base CFL bulbs. The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for one (1) year from the date of purchase.