Data Sheet

SPECIFICATION DATA SHEET
TENSIONED DESCENDER ELECTROL
SUGGESTED SPECIFICATIONS
Ceiling recessed electrically operated projection screen 230 volt (50Hz) with a usage of no more than 0.43 Am-
pere. The motor is mounted on the left side in the steel casing with rubber dampers to reduce sound. The motor is
mounted inside the roller, 4 wire, 26 rotations per minute, maintenance free, integrated brake and thermal overload
cut-out. The end positions are pre-set, but can be slightly adjusted afterwards. The 4 wire connection goes through
the metal casing. The casing is galvanised on the inside and on the outside powder coated with a matte structure
coating (RAL 9016). The roller with the projection surface is supplied fully mounted but can be removed on location
for the projection of the projection surface. After mounting the projection screen is reachable thought the bottom of
the casing. The metal slat bar closes of the bottom of the casing completely. The screen fabrics are fl ame retardant
and seamless in the viewing angle. The projection surfaces are standard with an extra high, black top border to allow
adjustments to the ideal viewing height. Each side of the surface to have tab guide cable system to maintain even
lateral tension and hold surface fl at. Custom slat bar with added weight maintains vertical tension on the screen
surface. The ends of the slat to be protected by heavy duty plastic caps enclosing a preset adjustable mechanism
for screen tensioning. The projection fabrics have a black backing. Standard 3 position wall switch is supplied. The
projection screen is CE marked and satisfi es the strictest quality and safety requirements.
S
CREEN SURFACES
All screen fabrics are seamless in the viewing area.
Matte White; Gain 1.0, viewing angle 120º, Flame retardant, max. heigth 300 cm, max. width 300 cm.
High Contrast Cinema Vision; Gain 1.1, viewing angle 120º, Flame retardant, max. heigth 228 cm, max. width 300 cm.
High Contrast Cinema Visions Sound; Gain 1.1, viewing angle 120º, Flame retardant, max. heigth 228 cm, max. width 300 cm.
Projecta BV
P.O. Box 191, 6000 AD Weert
Franklinstraat 14
6003 DK Weert
The Netherlands
Tel: [phone]
Fax: [phone]
[e-mail]
www.projectascreens.com
CUSTOM SOLUTIONS
Give exact the sizes of the projection screen you need:
Viewing size: _________ Heigth (cm.) x _________ width (cm.) Surface: ________________________________
Border top: _________ (cm.) Border bottom: _________ (cm.)
RAL color case and plastic parts: RAL _________ Screen fabric mounted reversely
Motor positioned on right side
Remarks: ___________________________________________________________________________
www.projectascreens.com/screendesigner
DIMENSIONS (SELECT ONE OF OUR STANDARD SIZES AND ENTER THE REQUIRED QUANTITY)
Aspect
Ratio
Screen
Size
Viewing
Size
Nominal
Diagonal
Case (RAL 9016) Weight Screen Surfaces Black-
drop
hxw cm hxw cm cm inches L1
(mm)
L2
(mm)
L3
(mm)
in kg Matte
White
HCCV HCCV
Sound
cm
4:3 138x180 126x168 210 83 2212 2132 1895 25 30
4:3 153x200 143x190 238 94 2431 2351 2113 27 30
4:3 168x220 158x210 263 103 2651 2571 2332 30 30
4:3 183x240 173x230 288 113 2819 2739 2481 32 30
4:3 213x280 203x270 338 133 3253 3173 2902 36 30
4:3 228x300 218x290 363 143 3471 3391 3114 39 30
16:9 102x180 95x168 193 76 2212 2132 1895 23 30
16:9 117x200 107x190 218 86 2431 2351 2113 25 30
16:9 128x220 118x210 241 95 2651 2571 2332 27 30
16:9 139x240 129x230 264 104 2819 2739 2481 29 30
16:9 162x280 152x270 310 122 3253 3173 2902 33 30
16:9 173x300 163x290 333 131 3471 3391 3114 36 30
16:10 129x200 119x190 224 88 2431 2351 2113 26 30
16:10 141x220 131x210 248 97 2651 2571 2332 28 30
16:10 154x240 144x230 271 107 2819 2739 2481 30 30
16:10 179x280 169x270 318 125 3253 3173 2902 34 30
16:10 191x300 181x290 342 135 3471 3391 3114 37 30