Manual

Positively earthed

Connect the BLACK lead (battery clip) from the charger to the Negative (-) battery terminal.

Connect the RED lead (battery clip) from the charger to the vehicle’s chassis away from the

fuel line or moving parts.

STEP 2C - CONNECTION IN VEHICLE WITH HARNESS (AC150 & AC250B ONLY)

Connect the RED ring terminal of the harness to the Positive (+) battery terminal.

Connect the BLACK ring terminal of the harness to the Negative (-) battery terminal.

Connect the plug on the harness to the charger’s output lead socket.

STEP 3 - BATTERY CHARGER SETTINGS (AC400 & AC800 ONLY)

Set the voltage selection switch to either 6V or 12V (AC400)

Set the ‘Charge/Engine Start’ switch to the ‘Charging’ position (AC800).

CONNECTION IN VEHICLE (POSITIVELY EARTHED)

POWER ON

FULLY

CHARGED

CHARGING

CONNECTION IN VEHICLE USING HARNESS

Vehicle Harnes

SWITCH SELECTION

AC400

Push in 12V side

for 12V Battery

Push in Charging

side for charging

AC800