Product Manual

VEHICLE JUMPSTARTING INSTRUCTIONS

NOTE: Instructions for negatively earthed vehicles only.

1. Charge your jumpstarter for 24 hours prior to first use and as soon as possible after

each use.

2. Before making any connections, check the jumpstarter battery status by pressing the

BATTERY STATUS button:

Green LED: Ready to use.

Yellow LED: Medium charge. Ready to use but must be recharged immediately

after jumpstarting.

Red LED: Low/Very low charge. Do not jumpstart. Recharge jumpstarter immediately.

3. Set the voltage of the jumpstarter by connecting the heavy duty voltage connector to the

appropriate 12V or 24V outlet on top of the jumpstarter. Ensure the jumpstarter voltage is

set to the same voltage as the vehicle being jumpstarted.

4. Turn your vehicle’s ignition OFF before connecting the jumpstarter’s clamps to your vehicle.

5. Connect the Red positive (+) clamp to the positive (+) terminal of the battery in the vehicle

and the Black negative (-) clamp to any non-moving metal part of the engine block.

DO NOT CONNECT TO FUEL LINE. Always double check that connections are correct.

6. Turn vehicle’s ignition on & start vehicle.

7. Disconnect the Black clamp and Red clamp.

8. Recharge jumpstarter.

HC3000 instruction Manual_1 15/11/11 1:45 PM Page 6