Product Manual

9
USING THE JUMPSTARTER AS A POWER SUPPLY
WARNING: ENSURE THE JUMPSTARTER IS SET TO 12V WHEN POWERING
APPLIANCES. IF SET TO 24V THIS MAY CAUSE DAMAGE TO THE APPLIANCES.
The jumpstarter utilises 2 x 23Ah AGM batteries and can be used as a power supply by
connecting a cigarette lighter plug into the DC socket located on the front of the
jumpstarter. It is recommended to check the battery capacity before using the jumpstarter
as a power supply.
Below is a list of approximate run times for various appliances.
TYPICAL APPLIANCE RUNNING TIMES
Appliance Estimated power
Estimated time*
consumption (Watts)
(Hours)
Car phones, fluorescent lights 4 80
Radios, depth finders 9 56
Fridges (portable compressor style) 14 41
Camcorders, portable TVs 15 32
Electrical tools, bilge pumps 24 19
Cooler/warmers, spotlights 48 8.5
Air compressors, car vacuum cleaners 80 4
*Estimated time is based on a fully charged jumpstarter
Note: The jumpstarter can be used to power 24V appliances. Ensure the heavy duty
voltage connector is set to 24V when powering 24V appliances.
IMPORTANT: AUTO-RESET CIRCUIT BREAKER FOR DC OUTPUT
The DC socket is protected with an automatic resetting circuit breaker. When the output
experiences a short circuit or overload, the circuit breaker will trip, cutting off the power
temporarily. After a few seconds, the circuit breaker will automatically reset and provide
power again.
HC3000 instruction Manual_1 15/11/11 1:45 PM Page 9