Manual

17
2.3.3 BATTERY STARTING CHARGE CAPACITY (CCA)
Measure the voltage of the batery terminals.
Procedure
– press the “MODE” button (fig. A.22) to select this function (fig. A.19);
– connect the battery terminal clamps, the message“Go” appears on the display
(fig. A.2);
– press the “BATTERY VOLTAGE” button (fig. A.21) to select the battery voltage
(fig. A.1);
– start the engine;
– check the display (fig. A.2) to read the battery starting capacity and the
following status:
– “OK” - STARTING CAPACITY OK;
– “SUF” - SUFFICIENT STARTING CAPACITY;
– “BAD” - INSUFFICIENT STARTING CAPACITY.
MODE
END OF TEST – EXAMPLE
CCA TEST SELECTION
working
sufficient insufficient
DISPLAY
LEGEND
MODE
END OF TEST – EXAMPLE
CCA TEST SELECTION
working sufficient insufficient
DISPLAY
LEGEND