Manual

25
2.6 ENGINE START – START
START mode (fig. A.15), is available for 12V batteries and supplies 70 A current as
a starter aid. If the battery is completely run down, it is advisable to perform a pre-
charge cycle before proceeding.
2.6.1 Procedure
– Press and hold the “CHARGE RATE” button (fig. A.23) for 3 seconds to select
the “ENGINE START” function;
– connect the vehicle battery terminal clamps (the flashing message “Go” appears
on the display (fig.A.1);
– now start the vehicle; a 30 second timer will engage and will appear on the
display (fig. A.1), at the end of which it will be possible to start the engine
again;
– on completing the selected process, disconnect the power cable from the mains
socket and disconnect the clamps from the battery terminals.
CHARGE
RATE
FUNCTION SELECTION
CHARGE
RATE
FUNCTION EXIT
3"
DISPLAY
CHARGE
RATE
FUNCTION SELECTION
CHARGE
RATE
FUNCTION EXIT
3"
DISPLAY