Product Manual

5
6. Place battery onto tray. Fit the J bolts and battery hold down clamp.
Secure top mount between the J bolt closest to the engine and the inner
guard as shown.
Use 1 x M6 30mm bolt, 2 x black spacers and washers.
Bolt through to the captive nut on the body using the washers under the bracket.
Note
i On 2010 onwards models, a spacer washer
may be required under rear leg of tray.
Use the gold washer provided.
ii If relay for bull bar lights is fitted, refit to computer
bracket as shown.
7. Reconnect the negative battery terminal
to the main starter battery or install the
desired Dual Battery System.
Before closing the bonnet make sure the battery,
tray and J bolts do not hit the bonnet.
For assistance throughout the installation procedure please call our customer service
representatives on 1800 113 443.