HEAVY DUTY DUAL BATTERY TRAY Tray Fitting Instructions to suit Auxiliary battery for Nissan GU Patrol 4.2 TDI and 3.0 TDI Years: 1999 to 2014 Models: TD42, 4.2 Litre Diesel, 2D30-TDI, 3.0 Litre Diesel with Intercooler P/No.
IMPORTANT SAFETY INFORMATION Please read this instruction thoroughly before fitting the tray. This product is recommend to be fitted by a workshop or qualified mechanical person. WARNINGS • Before installation, make sure that the vehicle is stationary and the wheels chocked. • Be careful when laying wires, not to cause any electrical shorts or wire breakage. • After installation ensure the bonnet can close without hitting the newly installed battery and battery tray.
FITTING INSTRUCTIONS 1. Make sure that the vehicle is stationary, the engine is switched off and cool. Disconnect the negative battery terminal from the main battery. 2. Remove radiator overflow bottle support bracket if fitted. 3. Remove bolt from bracket holding overflow bottle hose from inner guard.
4. Fit Special Tray Mounting Bracket to inner guard. Use 2 x M6 bolts in to the captive nuts on the inner guard. 5. Lay the battery tray into position lining up the holes with the Special Tray Mounting Bracket.
6. Bolt the tray into positon using the counter sunk bolts. Use the two captive nuts and one existing hole in the inner guard. Use the existing hole, bolt washer and nut provided. 7. Reattach overflow hose to bracket on tray.
8. Fit battery onto the tray. Install J bolts and lay the Special Top Mount over the battery and J bolts. The top mount will line up with one of the bolts from the side guard. Remove this bolt and tighten the bolt using the spaces provided to the Special Top Mount and the side guard. Tighten the wing nuts on J Bolts and Special Top Mount. 9. Reconnect the negative battery terminal to the main starter battery or install the desired Dual Battery System.
NOTES 7
WARRANTY STATEMENT APPLICABLE ONLY TO PRODUCT SOLD IN AUSTRALIA Brown & Watson International Pty Ltd of 1500 Ferntree Gully Road, Knoxfield, Vic.
