User`s guide

english
49
www.projectiondesign.com
Please refer to our website at projectiondesign.com to download the required
files or seek other information
8 Maintenance
8.1 Software upgrades
In order to upgrade your projector, please follow the method and sequence described below.
• You will need a USB memory stick set up with a FAT-file system to perform this upgrade
• Access the upgrade software from the following web-address;
www.projectiondesign.com
• Download and save the firmware.zip-file to your PC desktop
• Unzip and extract the firmware file to the root of a memory stick
PS! Important that the USB is safely removed from computer, using the eject function on your PC.
• Set the projector in standby mode
• Insert the memory stick in the projector and wait for a few seconds
• The LCD display will indicate that it has detected an upgrade file on the memory stick.
Wait a few seconds while the file is validated
• Remove the memory stick when the LCD display instructs you to do so.
• Do not remove the power cord while the upgrade is still in progress
• The projector may restart several times during the upgrade
The upgrade has finished successfully when the ordinary LCD display returns.