PT-1136 CORDLESS LIGHTED SCREWDRIVER 3.6V User’s Manual 1st Edition, 2013 ©2013 Copy Right by Prokit’s Industrial Co., Ltd.
PT-1136 User’s Manual Please read this instruction manual carefully before using the tool General Safety Rules WARNING Read all safety warnings and all instructions Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference The term “power tool” in the warnings refer to your mains operated (corded) power tool or battery operated (cordless) power tool. 1. Work area a) Keep work area clean and well lit.
PT-1136 User’s Manual f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust related hazards. 4. Power tool use and care a) Do not force the power tool. Use the correct power tool for your application.
PT-1136 User’s Manual 6. Service Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Safety Advice for Rechargeable Battery Use only the battery provided with the replacement rechargeable battery from Pro’sKit and the provided adaptor. Protect battery and adaptor from humidity. Do not operate the adaptor outdoors.
PT-1136 User’s Manual Technical Data Model No Rated voltage No-load speed Output torque Dirver(collect) Overall Length: Straight Overall Length: Angled Battery Charging time Free running time Weight Adaptor PT-1136A DC 3.6 V 200 rpm 2.5N.m 6.35mm (1/4") Hex Bit Shank PT-1136F DC 3.6 V 200 rpm 2.5N.m 6.35mm (1/4") Hex Bit Shank 270mm (10-13/16") 270mm (10-13/16") 210×140mm (7-23/32") 210×140mm (7-23/32") Ni-Mh 3.6V 1000 mAh 5~7 hours 30-35 min. (unload speed) 365g 120V AC 60Hz 6V DC 300mA Ni-Mh 3.
PT-1136 User’s Manual Product Introduction LED Light LED Light switch Angle Lock Froward& Reverse Switch Charging light indication Initial operation Charging the Battery The rechargeable battery must be charged before the first use. Only recharge the battery once it is has been fully discharged, i.e. the performance clearly decreases. Otherwise the battery may not achieve its full capacity at the subsequent charge. Important! Only use the provided adaptor for charging the battery.
PT-1136 User’s Manual LED Light The machine has a built in LED light; it is convenience for working in dark environments. The LED light switch is at the top of handgrip. Simply slide the switch on and off as required when needed. Turn off when not needed so as to save battery life. Operation for working Only use tool bits which can be securely fastened in the chuck and for which the bits has been designed. Before using the machine check whether the screw-bit is inserted correctly.
PT-1136 User’s Manual PT-1136A/F 鎳氫充電起子 3.6V 使用說明書 使用前請先詳讀本份操作手冊 基本安全規則 警告:沒有按照以下安全注意事項及使用說明操作,將導致觸電、火災或其它嚴重傷害。 請將本份文件加以保存以供日後所須參考使用。 1. 工作區域 a) 請保持工作環境整潔明亮,混亂昏暗的環境將引發事故。 b) 請不要在易爆環境中使用電動工具,例如在易燃的液體、瓦斯或者粉塵環境中。 電動工具使用時所產生的火花可能點燃粉塵或氣體。 c) 工作環境中請勿有孩童及旁觀者,以免分心造成失誤。 2. 電器安全 a) 電動工具插頭請與相配的插座使用。請不要以任何方式拆解並改裝插頭,需接地的電 動工具不可使用轉接插頭。使用未拆解過的插頭和匹配的插座將減少觸電的風險。 b) 請避免讓人體接觸接地表面,像是管道、散熱器、爐灶及冰箱等,如果你的身體接地將 會有觸電的風險。 c) 請避免讓電動工具暴露在雨中或是潮濕的環境中.
PT-1136 User’s Manual 4. 電動工具的使用及維護 a) 請選擇適當的電動工具。請依據您的工作狀況使用正確的電動工具,可使工作更有效率、 更安全,並使電動工具發揮最大效益。 b) 當電動工具的啟動開關不能開啟或關閉電源時請停止使用,請送回原廠修理以免發生危 險。 c) 當電動工具要進行調整、更換配件或儲存不用時,請先將插頭拔下,此預防安全措施可 降低電動工具意外啟動的風險。 d) 電動工具請貯存在兒童無法接觸的地方。請不要讓不熟悉或對操作說明不瞭解的人員使 用。未經訓練的人員操作電動工具會造成危險。 e) 電動工具維護:請檢查電動工具可調的部位是否到位,零件是否有破損或是有其它任何 f) g) 可能影響電動工具操作的情形。如有損壞,請先進行修理後才能使用。許多事故都是因 為電動工具未作好維護而造成的。. 保持鑽頭(或批頭)鋒利和清潔,適當的維持在鋒利狀態可減少卡住的狀況且易於使用。 依據本操作說明及操作方法,考量工作環境及需完成的工作,選用適當的電動工具、配 件及批頭進行作業。選擇不適合的電動工具會產生危險狀況。 5.
PT-1136 User’s Manual 如果任何人接觸到電池內部液體或物質,請立即用大量清水沖洗。如果這些物質接觸眼睛,請立 即用清水沖洗後立刻就醫。 請勿將將充電電池放入水中或火中,以免發生爆炸。無論充電電池是否使用,均不可當作家用垃 圾丟棄。您應該按照電池回收條例送到當地國家的電池回收站或是交回給我們並標示為“使用過 電池"。 規格 型號 PT-1136A PT-1136F 額定電壓 DC 3.6V DC 3.6V 無負載轉速 200rpm 200rpm 2.5 N.M (MAX) 2.5 N.M (MAX) 輸出扭力 工作夾頭 6.35mm( 1/4") 內六角插孔 電池 鎳氫電池 3.6V 1000mAh 鎳氫電池 3.6V 1000mAh 5-7 小時 5-7 小時 30~35 分鐘. (無負載) 30~35 分鐘.
PT-1136 User’s Manual 產品功能 操作說明 LED 照明燈 LED 照明燈開關 角度調節按鈕 正反轉切換按鈕 充電指示燈 基本說明 充電 首次使用前請先將可充電電池充飽電。每次電池完整放電後才能再次進行充電,以避免電池效率 降低。除此之外還會造成之後每次充電都無法充飽電的情況發生。 重要! 請使用原廠所提供的變壓器為電池充電。當電力耗盡時請盡快充電,充電時紅色充電指 示燈會亮起,請控制充電時間在5~7小時內,充電完成請移除變壓器。 過度消耗電力及過長時間充電都會對電池造成傷害。 插入批頭 本產品夾頭內有磁鐵可吸附批頭,使用時可直接插入或拔出批頭,不需特別對準且快速方便。 正反轉切換按鈕 當正反轉按鈕往上按時批頭會向右轉(旋緊),往下按則是向左轉(鬆開),鬆開開關後即停止運轉。 特别注意 ! 切換時請待旋轉動作停止後,再切換下一個動作,旋轉中直接切換將容易造成機 器損傷,請適當控制切換速度,以保護開關。 LED照明燈 本產品內建LED照明燈可提供於昏暗環境進行作業,照明燈開關位於電動工具上方,不使用時請 隨手關燈以節省電力。 操作使用 請使用合格的批頭產品, 并確認規格符合本產品的裝配尺寸。
PT-1136 User’s Manual 螺絲旋出 請將批頭放入本機夾頭內,批頭與螺絲呈垂直方向,否則螺絲將造成損壞。將批頭對著螺絲按下 反轉開關將螺絲旋出。 維護和清潔 請使用乾的或是微濕的毛巾進行清潔。許多清潔劑含有化學物質,可能會使機器的塑膠部位造成 損壞。因此請勿使用其它較強烈或易燃的清洗劑像是汽油、松香水,松節油及其它類似的清潔劑。 本機通風孔請防止灰塵沉積以免過熱。 服務 更多關於 PT-1136A / PT-1136F 的資訊及其它產品, 請上本公司網站www.prokits.com.tw Certificate Number: TW98/12323QA ©2013 Copy Right by Prokit’s Industrial Co., Ltd. 2013001(C) www.prokits.com.