SS-820B Digital Ultrasonic Cleaner USER MANUAL Features: 1. 2. More evenly distributed ultrasonic waves inside the tank: Industrial grade ultrasonic transducer: The dimensions are optimal for a 2000 ml (2.1 quart) tank. Stronger cleaning, higher durability 3. 2-color LED display: 1 to 30-minute full range timer, suitable for many different cleaning applications 4. Ceramic heater: Advanced ceramic heater, safe and efficient 5. Overheat protector: 6. Dual heater protection: 7. Cooling fan: 8.
INTRODUCTION Use tap water. Chemical solutions are unnecessary in most cases. Principles of ultrasonic cleaning: Millions of tiny air bubbles are generated inside the liquid by high frequency vibration. The air bubbles bust inside the liquid and shake off the debris to achieve the cleaning effect. Purified water or distilled water has the same cleaning effect as regular tap water for ultrasonic cleaning. Therefore using tap water is sufficient.
SAFETY PRECAUTIONS Keep it away from children! This device is not intended for use by individuals with restricted physical, sensory or metal capacities or those with a lack of experience and / or knowledge, including children, unless they are supervised by an individual who is responsible for their safety or have received training in operating the device. Please store the ultrasonic cleaner where it is not reachable by children.
SAFETY PRECAUTIONS To prevent fire hazards, please observe the following: Never block the vents on the device. Keep the vents free from lint, hair and other materials. Do not place the device on a soft surface, such as a bed or a couch, where the vents could be blocked. Observe the other warnings in the previous section. Other observations: Do not operate the product without filling the tank with water. Running dry will damage the unit. Do not plug in the power cord before adding water to the tank.
APPLICATIONS Jewelry Stores, Jewelry Makers: Jewelry stores can use ultrasonic cleaners to expand services. Jewelry such as necklaces, diamond rings, rings, earrings can be cleaned with tap water to recover the shine. Jewelry makers can use ultrasonic cleaners to remove debris or abrasive powder from work-in-process items addition to debris. Turning on the heater will raise the water Jewelry made with investment casting often has wax layer in temperature, melt the wax and improve the cleaning.
Shooting Clubs To reuse brass cartridges: Adding special acid-based solution can make fired brass useable and like new again. Gun cleaning and care: Cleaning guns after shooting is time consuming. Adding special solution in the water and using ultrasonic cleaners can complete the cleaning better, quicker and easier than traditional methods.
SAMPLE APPLICATIONS Jewelry Necklaces, rings, earrings, bracelets, etc. Precision Parts Bearings, gears, valves, fuel injectors, etc. Lab Items Test tubes, beakers, flasks, etc. Personal Items Eyeglasses, sunglasses, shaver heads, watch bands, diver’s watches, dentures, etc. Dental Instruments Pliers, handpieces, etc. Silverware, Silver, Copper or Brass Decorations Children and Baby Items Silverware, silver, copper or brass decorations, etc. Toys, baby items, etc.
PRODUCT STRUCTURE AND ACCESSORIES A B D E F G A. Lid B. Stainless Steel Tank H C. Water Pouring Recess D. Control Panel E. Housing F. Basket G. Power Socket H.
1. Indicator Light - Working Status Green - Normal working status, ready to use. Red - Under overheat protection. 15 minutes of waiting time is needed for the light to change from red to green. Work can resume afterwards. 2. On/Off Key - On/Off Switch for the Unit After powering on, the LED displays with normal working status. which is the default time and the unit is ready Press On/Off button once and the cleaning starts. The cleaning stops when the timer count .
COMMON CLEANING METHODS 1 REGULAR CLEANING Only tap water is needed. Suitable Locations: jewelry stores, optical stores, chemical labs, dental clinics, homes. Cleaning Method: 1. Add water to the cleaning tank to the level between “MIN” and “MAX” lines and above the area to be cleaned. 2. Put the items to be cleaned inside the basket or directly in the cleaning tank. 3. Press SET button to set the timer 5 to 10 minutes. Press On/Off button to start cleaning. Notes on using the basket: 1.
ENHANCED CLEANING Debris accumulated over long time, greasy or heavily soiled. Suitable Locations: jewelry makers, homes, automotive repair shops. Cleaning Method: 1. Put the items in the cleaning tank directly. Do not put the items on top of each other to avoid rubbing during cleaning. 2. Add water to level between MIN and MAX and above the area to be cleaned. 3. Add 20 ml (1 tablespoon) of dishwashing liquid. 4. Press TC to turn on the heater, flashes.
OPERATION GUIDELINES 1 Remove the lid, put the items in the basket then put them in the cleaning tank. Add water to a level between MIN and MAX and above the area to be cleaned. If the unit is turned on without water, ultrasonic energy will not be absorbed. Once over 30 seconds, it may damage the unit or severely reduce the life of the unit. 2 Connect the power cord to an outlet. LED display shows . This is the most common timer setting and working state.
5 When cleaning is completed, unplug the power cord, remove the lid and retrieve the items. Pour the water out through the pouring recess. Clean and wipe the tank. CARE AND MAINTENANCE 1 Do not turn on the unit without water in the tank. Even though the unit is designed with multiple protections, if it is turned on for over 30 seconds without water in the tank, it may damage the unit or severely reduce the life of the unit. Do not run the unit for extended time or continuously.
SPECIFICATIONS Description Model No. Digital Ultrasonic Cleaner SS-820B Plug Type Power Supply Tank Size Tank Capacity 18.3 x 15.3 x 7.7 cm / 7.2” x 6.0” x 3.0” 2000 ml /2.1 quart (US) Tank Max. water line Max.1700 ml / 1.8 quart (US) Tank Min. water line Min.550 ml / 0.6 quart (US) Longest Item Fits inside Tank 20.4 cm / 8.0” Digital Timer Settings 1 to 30-minute full range timer Ultrasonic Frequency 35,000 Hz Tank Material Housing Material Stainless Steel SUS304 ABS Net Weight 2.2 kg / 4.
SS-820B 數位超音波清洗器 使用說明書 特點: 1. 槽內超音波分佈更均勻 2000ml 容積槽最佳的長 X 寬尺寸 2. 工業用超音波發生器 清洗能力強,壽命長 3. 雙色LED顯示器 1~30 分鐘自由定時,適應多種清洗要求 4. 陶瓷加熱器 加熱均勻、耐用 5. 設有過熱保護電路 防止超載運行,有效延長機器壽命 6. 加熱器雙重保護電路 為確保安全,加熱器連續工作 45 分鐘後斷電 7. 熱風扇 改善散熱條件,有利於元器件連續工作 8. 經防潮處理的PCB板 適合更多的工作場所 9. 消氣功能 可加速清洗液與水的溶合 10. 工業級IC 有更強的抗干擾能力 11. 可分離電源線 使用更方便 12.
簡介 通常不需要特殊的清洗液,僅需普通的自來水 超音波清洗原理: 超音波清洗是以液體為介質,在高頻振動下產生無數的小氣泡,而這些小氣泡爆破時 所產生的能量使污垢脫落而達到清洗效果。 在超音波清洗中,使用純淨水或蒸餾水與普通自來水的清洗效果相同,因此使 用普通自來水即可。 當銀器及銅器的表面被氧化而發暗時,需在水中加入少量的有去氧化層作用的 專用清洗液,方可達到既清洗掉污垢又除去氧化層。 主要特色 清洗槽尺寸:18.3x15.3x7.7cm,可清洗的最大物品長度20.
安全說明 注意防止發生火災及人員傷亡 除專業人員,請勿自行拆裝產品。 MAX 往清洗槽加水之前,請不要插上電源,水量不要超過“MAX-” 線,避免水溢出。 禁止用濕手插、拔插頭,以防觸電。 請按使用手冊正確使用產品,切勿擅自使用配件。 請不要使用電源線或插頭已損壞的產品。 若不能正常工作的產品,請拿到指定維修點進行檢修。 禁止產品在沒有注入水的情況下啟動,"乾燒" 會導致產品損壞。 當加熱器開啟時,請勿用手觸摸清洗槽底部,以免燙傷。 1
安全說明 請提高警惕以防止發生觸電意外 禁止在睡覺或打瞌睡時使用產品。 產品應遠離熱源,並放置於乾燥、平坦的臺面。 若在使用過程中,產品掉入水中,請不要觸摸產品, 應立即切斷電源。 禁止用水直接沖洗產品。 不宜清洗物品 珠寶類 玳瑁、珍珠、綠寶石 象牙、珊瑚、瑪瑙等 金屬類 焊接金屬、電鍍金屬 金屬粘合物等 手錶類 手錶、懷錶等(50米以 上的防水錶除外) 其他 木製品、玻璃、隱形眼鏡 陶瓷製品、相機濾色鏡等 2 由於一些玳瑁、珊瑚等硬度不高,在清洗時有可能會出 現因相互摩擦導致刮痕。 用超音波清洗,可能會使焊接點、電鍍層及粘結物品原 有的縫隙加大,而出現剝落現象。 超音波的滲透性強,偶爾會使防水性不強的手錶有水滲 入。(可使用手錶清洗支架來清洗) 鍍膜的玻璃鏡片、陶瓷、木製品、玻璃製品在清洗中, 原有的細微裂紋偶爾會因清洗而使裂紋擴大。(完好的 則不會出現)
廣泛應用 (1). 珠寶店 /珠寶首飾製造行: 珠寶店——用於增加服務專案。對於正在使用的首飾(如項 鏈、鑽戒、耳環等)只需使用普通自來水,經超音波清洗後, 重新恢復閃亮如新。 珠寶首飾製造行——超音波清洗可以去掉珠寶首飾在打磨製 作過程中殘留的污垢。 採用蠟型澆注成的金、銀首飾,縫隙內常有少量的蠟層,需 打開加熱器,提高水溫,使蠟層快速溶化,增強清洗效果。 (2). 眼鏡店: 用於客戶的增值服務。只需普通自來水,在超音波的作用下, 可去除附著在眼鏡框與鏡片的接合縫隙的污垢,讓眼鏡得到 更專業的清潔與護理。 (3). 生物 / 化學實驗室: 用於實驗室內的各種玻璃/金屬器皿的精細清洗,避免固態及化 學品殘留影響試驗準確度。 (4). 牙科診所: 用於牙科器具在消毒前的清洗,避免器具縫隙殘留的血跡及 細小的固體殘存而導致消毒達不到效果。 (5).
(6). 射擊俱樂部: 彈殼重複使用 ——在水中加入少量的草酸類的專用清洗液, 清洗後的彈殼恢復如新,可再次使用。 槍械零件清洗保養 ——槍械的擦拭保養是費時的工作,在 水中只需加少量的清洗液,即可快速完成清洗,省時省力。 (7). 手機 / 電子產品維修店: PCB板恢復功能 ——電子產品因被水浸泡或操控鍵失靈需 要維修時,可用無水酒精作清洗液,將PCB板直接放入清洗, 可洗去滲入的污垢,從而恢復使用功能。 (8). 鐘錶維修店: 精密零件的清洗 ——因鐘錶的零件較小,可用不銹鋼 / 玻璃 器皿盛裝,將被清洗的零件浸泡在維修用的機油內,將整個 器皿放入槽內,清洗槽加水,超音波會穿過器皿作用在被清 洗的物品上,使其小孔及縫隙間的污垢被清理。 (9). 噴繪 / 列印店: 疏通堵塞的噴嘴 ——噴繪機及噴墨的印表機,常因停機後 噴嘴堵塞而無法使用,只能更換噴嘴或墨水匣,成本很高。在 水中加少量的丙酮類溶劑,通常只需1~2分鐘即可使噴嘴 / 墨水匣堵塞的小孔通暢,恢復使用。 (10).
應用舉例 珠寶首飾類 日用品類 牙科器械 項鏈、戒指 耳環、手鐲等 眼鏡、太陽眼鏡、刮鬍刀頭 手錶鏈、防水手錶、假牙等 拔牙鉗 手機鑽等 精密金屬零件 高檔餐具/銀、銅飾品 兒童/嬰兒用品 軸承、齒輪 閥門、噴油嘴等 金屬餐具及銀、銅飾品等 幼兒玩具 嬰兒用品等 實驗室用品 彈殼/槍械零件 PCB板/墨水匣噴嘴 試管、量杯 燒杯等 需重複使用的彈殼 槍械零件等 手機、MP4等的PCB板 噴繪機的墨水匣、噴嘴等 5
超音波除垢過程 水在超音波的作 用下,會產生許 多微小汽泡 在超音波的作用下汽泡不斷 地“爆炸”衝擊物體表面的 污垢 污垢分裂成小顆 粒狀並脫離物品 產品結構及附件 A Function B D E F G H 6 A. 上蓋 C. 出水口 B. 不銹鋼清洗槽 D. 操作控制面板 E. 外殼 F. 清洗筐 G. 電源線插孔 H.
控制面板上的功能鍵及操作指引 1.指示燈 6. 加熱器顯示 2.On/Off 鍵 7. LED顯示幕 3.Function 鍵 8. Set 鍵 4.消氣功能顯示 9. 5.正常功能顯示 10.TC 鍵 鍵 1. 指示燈——工作狀態指示燈: 綠燈亮時——本機工作狀態正常, 可以使用. 紅燈亮時——本機處於過熱保護狀態, 需停機15分鐘以上, 待紅燈變成綠燈後, 方可繼續工作. 2. On/Off 鍵——清洗機開關鍵: , 這是常用的清洗時間及工作狀態. 接通電源後, LED顯示幕自動顯示 按 On/Off 鍵後, 超音波開始清洗, 當顯示幕顯示為 時, 機器自動停機. 若需中途停機, 按On/Off 鍵即可. 3. Function 鍵——功能轉換鍵 [消氣 / 正常] 按 Function鍵, 顯示, 可選擇 [消氣]功能. 按 On/Off 鍵, 進入[消氣]狀態. 顯示幕上 不斷 閃爍, 1分30秒後, 自動回到[正常]清洗狀態. 需增加消氣時間, 再按Function鍵即可.
常用清洗方法 普通清洗 1 只需使用普通自來水清洗。 適用場所:珠寶店, 眼鏡店, 生物 / 化學實驗室, 牙醫診所, 家庭. 操作方法: 1.將需清洗的物品放入清洗筐內或直接放入清洗槽。 2.往清洗槽內加水,並使水位線在MIN與MAX之間 且漫過需清洗的部位。 3.按 Set 鍵設定5~10分種的清洗時間,再按 On/Off 鍵開機清洗即可。 清洗筐使用注意事項: 1. 清洗筐可減少清洗物品與清洗槽之間的摩擦, 但 會吸收30%的超音波能量, 使清洗能力明顯減弱. 2. 當清洗較大且油垢較多的物品時, 可直接放在清 洗槽內清洗. 在清洗過程中,您會看到污垢像 “煙” 一樣從物品的夾縫中飄出,同時水逐漸渾濁。當您看 不到 “煙”飄出時,表明物品已基本清洗完成。更換乾淨的自來水,可繼續清洗其他物品。 穿透式清洗 2 將需清洗的物品浸泡在容器中,再將整個容器放入 清洗槽中作穿透式清洗。 適用於: 鐘錶維修店、噴繪 / 列印店 手機 / 電子產品維修店、家庭 不同行業使用的浸泡液體不同: 1. 鐘錶維修——常用航空機油(防止零件生銹) 2. 噴繪 / 列印店——常用丙酮類溶劑(溶解油墨) 3.
加強清洗 3 清洗物品的油垢較多且沉積的時間較長時採用加強 清洗。 適用場所: 珠寶首飾製造行,家庭 摩托車 / 汽車修理店 操作方法:1.對於尺寸較大的零件,可直接放入清 洗槽中,尺寸較小的物品,先將物品放入清洗筐再 一同放入清洗槽。 請勿將物品重疊,避免在清洗過程中相互摩擦。 2.往槽內加入自來水,保持水位在MIN與MAX之 間且漫過需清洗的部位。 3.往水中加入少量的清洗餐具用的清洗液約20 ml。 4.按 TC 鍵打開加熱器,此時 閃爍,約20~30 分鐘後,水溫超過40 ℃即可。 溫水及清洗液能軟化油脂,提高清洗效率。 5.按 Set 鍵,選擇10分鐘定時,按 On/Off鍵,超音 波開始清洗,油垢像“黑霧” 一樣在水裏擴散。 6.清洗完成後,重新換水,將物品再次清洗3分鐘,以便除去殘垢及清洗液殘留。 特殊清洗 銀、銅製品表面已氧化發暗,彈殼重複使用,需 特殊清洗 適用場所: 珠寶店,家庭,射擊俱樂部 操作方法: 4 特殊清洗 1.將物品放入清洗筐內並一同放入清洗槽,加入自 來水,水位在MIN與MAX之間且漫過需清洗的部 位。 2.
操作指南 1 打開蓋子,將需清洗的物品放在清洗筐中,並一同放 入清洗槽內,加入自來水,保持水位在 MIN 與 MAX 之間,但要浸沒物品需要清洗的部位。 未加水時,啟動機器,因超音波無法向外釋放, 超過30秒,可能損壞機器或嚴重影響機器壽命。 2 如圖所示,接通電源。 LED 顯示幕上自動顯示 ,這是最常用的定時 及工作狀態。 需調整定時,可按 Set 鍵及 鍵,自由設定1~30分 鐘的清洗時間。 常用的清洗時間為: 5分鐘 / 10分鐘 / 15分鐘。 過長的清洗時間有可能導致:1. 螺釘松脫 3. 已損傷的鍍層片狀脫落 2. 原有的裂紋擴大 3 按 On/Off 鍵,開始清洗。 清洗時,會聽見清洗槽內發出“滋滋”的聲音, 表明正 在清洗,蓋上蓋子,聲音會明顯降低。 LED顯示幕上倒計時顯示剩餘工作時間,當顯示 時,清洗完畢。 在清洗過程中需暫停清洗,按 On/Off 鍵即可。 本機設有過熱保護電路,避免長時間連續清洗。 紅色指示燈亮時,強行開機,超音波也不會工作。 需停機約20分鐘,待綠色指示燈亮後,方可繼續清洗。 4 參照 "常用清洗方法",選擇合適的清洗方法。 1.
5 清洗完畢後,拔下插頭,打開蓋子,取出清洗物品,從 機器上出水口處倒掉髒水,並擦乾清洗槽。 (如圖所示) 當機器受到電磁干擾時,可能會出現停機或操控失 靈,需拔下電源插頭並重新插入後,方可恢復操控。 保養與維護 請勿不加水開機 雖然機器設有多種保護電路,但如果不加水開機,超過30秒, 有可能會損壞機器或嚴重降低機器壽命。 請勿長時間連續清洗 機器內設有過熱保護電路,連續清洗45分鐘後,建議停機約 20分鐘,以延長機器的使用壽命。 請勿將水長時間存放在清洗槽內 使用後,拔掉電源,按出水口方向倒水。 避免操作不當,水從排風口進入機內,導致機器故障。 請勿用水直接沖洗外殼 用幹毛巾把清洗槽內和機器外殼擦幹。 請勿爆曬 請將機器放置於陰涼、乾燥、通風處。 11
產 品 規 格 數位超音波清洗機 產品名稱 產品型號 SS-820B 插頭形狀 電壓及功率 160W (AC 220-240V 50Hz) 清洗槽尺寸 18.3x15.3x7.7cm (7.2”x 6.0”x3.0”) 清洗槽容積 2000ml/2.1 quart (US) 清洗槽滿水位 Max.1700ml/1.8quart(US) 清洗槽低水位 Min.550ml/0.6quart(US) 清洗物品的最大長度 數碼定時 20.4 cm / 8.0” 1~30分鐘自由定時 超音波頻率 35,000 Hz 清洗槽材質 不銹鋼 SUS304 外殼材質 ABS 產品淨重 2.2 kg / 4.9 lb 產品毛重 2.9 kg / 6.4 lb 產品尺寸 26.5 x 23.0 x 18.0 cm / 10.4” x 9.1” x 7.1” 內盒尺寸 30.0 x 26.5 x 22.0 cm / 11.8” x 10.4” x 8.7” 裝箱數量 4 pcs. 外箱尺寸 55.0 x 31.0 x 46.0 cm / 21.7” x 12.