User manual

Setting the software (quick start guide)
Once the XMPLAYER software has been installed you now need to set it up.
To start the set up, double click on the “XMPLAYER” icon on your desk top and the programme
window will appear (g 8). On the top bar click on the “CONTROL” drop down and click on
“LED CONTROLLER CONFIGURATION” (g 9).
Now click on the “PARA SETTING” (g 10) icon in the window and enter the password
“DBSTARLED” and click “OK” (g 11).
A new window will now appear “LED CONTROL SETTING” (g 12).
In the LED CONTROL SETTING window, click on the “IMPORT” button and select the
“64-48(pm).rsps” le that is supplied on the software disc and click “OPEN” (g 13).
Now back into the LED CONTROL SETTING WINDOW click on the “SEND ALL PARA” button on
the bottom right hand side of the window (g 14).
LEDJ P85 5.5 x 4M Pixel Cloth System Setting The Software
7.
Fig 8. Fig 9.
Fig 10.
Fig 12.
Fig 11.
Fig 13. Fig 14.