User manual
REFLEX
8
- 2 - INSTALLATION
2.1 MOUNTING
The REFLEX may be set up on a solid and even surface. By means of the xing facilities of the baseplate, the
unit can also be mounted upside down to a cross arm (g.3). For xing, stable mounting clips are required.
Always ensure that the unit is rmly xed to avoid vibration and slipping while operating. The mounting
place must be of sucient stability and be able to support a weight of 10 times of the unit’s weight. When
carrying out any installation, always comply scrupulously with all the regulations (particularly regarding
safety) currently in force in the country in which the xture’s being used.
Always additionally secure the projector with the safety rope from falling down.
For this purpose, fasten the safety rope at a suitable position so that the maximum fall of the projector
will be 20 cm.
CLAMP
SAFETY
CABLE
OMEGA
BRACKETS
Fig.3