User manual
11
REFLEX
Fig.5
DMX512 Controller
. . . . . . . . . . . .
DMX Address: 33 DMX Address: 78DMX Address: 48 DMX Address: 63
3.4 DMX MODE
• Press the MENU button and select, via the directional buttons, the [DMX FUNCTIONS] menu choice, then
press the ENTER button to conrm the choice.
• Select the [DMX Address] menu voice and conrm the choice by pressing the ENTER button.
• Edit the DMX address value into the [1 - 512] range using the UP/DOWN buttons.
• Press the ENTER button to conrm the DMX address value.
• Press the MENU button to go back or waiting for one minute for automatic exit from the menu.
3.5 DMX ADDRESSING
To able to operate the REFLEX with a light controller, adjust the DMX start address for the rst a DMX chan-
nel. If e. g. address 33 on the controller is provided for controlling the function of the rst DMX channel,
adjust the start address 33 on the REFLEX. The other functions of the light eect panel are then automati-
cally assigned to the following addresses. An example with the start address 33 is shown below:
3.6 VIEW DMX VALUE
It is possible to view the DMX value and the relative function on the LCD display in the following way:
• Press the MENU button, select the [DMX FUNCTIONS] menu voice and press the ENTER button to conrm
the choice.
• Select the [View DMX Value] menu voice and conrm the choice by pressing the ENTER button.
• Use the directional buttons to view all the menu voices.
• Press the MENU button to go back or wait for one minute for automatic exit from the menu.
Example 15 DMX channels configuration
Number of
DMX channels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
15 33 33-47 48 63 78