Owner Manual

22
RECIRCULATING KIT INSTALLATION
OPTION 2
Under Cabinet Installation:
• Mount the Recirculating Kit (A) in its desired location to the bottom of
your cabinet, using wood screws or other appropriate hardware.
• Fasten the top of your hood (B) to the bottom of the recirculating kit
(A) by using 6-8 evenly spaced self-tapping screws (C).
• Join the top panel of the hood to the bottom flange of the
recirculating kit by drilling and placing these screws from the under
side of the hood.
•Optional: Apply strips of self-stick, double sided foam tape (D) around
the bottom perimeter of the recirculating kit before joining with screws to
provide more adhesion, minimize rattling, and dampen noise.
• Finish installation by mounting the hood and recirculating kit,
through the back of the hood, to the desired location on the wall.
Follow the detailed directions in the previous section, Under Cabinet
Hood Installation pg 20.
A
B
C
D
This concludes the installation of an inline blower. If you
have any questions about the installation process please call
Proline Customer Service at 877.901.5530
or visit prolinerangehoods.com.