Owner Manual

ISLAND HOOD INSTALLATION

STEP 4

Install Chimney

• Slide inner chimney sleeve over support brackets, covering the ceiling

bracket.

• Screw into place at the top of ceiling bracket.

• Slide outer chimney sleeve over inner chimney sleeve.

• Adjust until the bottom chimney sleeve is a few inches above the

bottom of the support brackets.

• You may want to use masking tape to help hold the chimney in place

while you proceed to Step 5.

STEP 5

Attach Hood

• If your hood comes with a transition ducting piece, secure it to the

base of your hood before mounting.

• Place the base of the hood directly under the chimney.

• Screw hood to the support brackets on all four corners.

• Feed electrical and ducting work through chimney.

• Power your hood by hardwiring your hood to a power source or by

plugging it in to a nearby electrical outlet if there happens to be one

available.*

• Slide outer chimney sleeve down into place, meeting the top of the

hood.

*Always consult an electrician before directly wiring a hood to a power source.