Owner Manual

RECIRCULATING KIT INSTALLATION

OPTION 1

Wall Installation:

• Fasten the bottom of the recirculating kit (A) to the top of your range

hood (B) by using 4-6 evenly spaced self-tapping screws (C).

• Join the top panel of the hood to the bottom flange of the

recirculating kit by drilling and placing these screws from the under

side of the hood.

•Optional: Apply strips of self-stick, double sided foam tape (D) around

the bottom perimeter of the recirculating kit before joining with screws to

provide more adhesion, minimize rattling, and dampen noise.

• Finish installation by mounting the hood and recirculating kit,

through the back of the hood, to the desired location on the wall.

Follow the detailed instructions in the previous section, Under Cabinet

Hood Installation pg 20.