Owner Manual

INLINE BLOWER INSTALLATION

STEP 1

Insert Mounting Screws to the Wall:

• After finding a location where you are going to mount your inline

blower, find the specific location where your inline blower mounting

bracket will go. Remember, the mounting bracket needs to be

mounted to solid studs or rafters in the framing of your home or attic.

• Trace the location of the large circle in the two channels of the flat

side of the mounting bracket on the wall. This is where the bracket will

be mounted to the screws. See illustration for Step 1 (locations marked

in red.)

•Using the appropriate drill bit for the hardware you are using, pre-drill

and insert the screws in your marked locations. Leave the screw head

a 1/4” out from the wall for now. This gap will be used to hang the

blower and bracket while mounting them to the wall in Step 3.