Owner Manual

6
VENTING OPTIONS
HORIZONTAL WALL VENTING
•This is an alternative option to vertical venting. Ducting goes
horizontally from the range hood through the house’s side wall.
Depending on the model of hood, venting can go straight through
an exterior wall from the back of the hood if the hood has an option
to rotate the blower panel (Option 1). This option is only available on
specific models.
•The second option is to vent off the top of the blowers and elbow off
of the top of the hood, through the wall (Option 2). For correct venting
please allow at least 18" of straight vertical travel off the top of the
transition piece before attaching the elbow. (As seen)
•A side wall cap is needed to protect the ducting from the exterior. Seal
the side wall cap with caulking.
1
2
Min. 18"