Operation Manual

Fillingwithsalt
 Unscrewthecapfromthesaltcontainer.
Beforefirstwash,fillthesaltcontainerwith1.5litreofwater.
 Placethesuppliedfunnelsotheendfitsintotheopeningofthesaltcontainer.Load
about1.5kgofsaltintothesaltcontainer.

Screwthecapbackclockwise.


NOTE:Refilltherinseaidwhentheopticallevelindicatorbecomesclearagain,orwhenthe


rinse

aid

warning

light

illuminates.

12
11 22 33
The factory setting for the dishwasher is and you can choose among 6 settings. 3
The amount of rinse aid dispensed is proportional to the selector position.
1. To adjust the rinse aid setting, remove the dispenser cap.
2. Use a screwdriver (not supplied) to rotate the rinse aid
selector to the desired position.
3. Replace the cap and turn it clockwise.
Adjusting the rinse aid dispenser setting
Using the Rinse Aid and Detergent Dispensers
The rinse aid helps the dishes dry faster and prevents the
formation of scale deposits and staining. It is automatically
added to the water during the final rinse cycle.
The detergent and rinse aid dispensers are located on the
inner part of the door: the detergent dispenser is on the
left, and the rinse aid dispenser is on the right.
Adding the rinse aid
Rotate the dispenser cap anticlockwise and remove it.
Add the rinse aid until the container is full.
 The optical level indicator on the side of the cap should be completely dark.
Replace the cap and turn it clockwise.
Downloaded from www.vandenborre.be