Operation Manual

Downloaded from www.vandenborre.be
7
Installing a Battery in the Remote
To install or replace the battery:
1 Pull the battery tray out of the remote.
2 If you are replacing the battery, remove the old battery and
dispose of it properly. Note the orientation of the + and - sides of
the battery.
3 Insert the new battery into the battery tray, the same way the old
battery was placed.
4 Close the battery tray.
Warning
There is danger of an explosion if you replace the battery
incorrectly. Replace only with the same or equivalent battery.
LITHIUM BATTERY
CR 2025
3V
CR2025
PUSH
OPEN
LITH
IUM BATTERY
CR 2025
3V
CR2025
PUSH
OPEN