SERVICE MANUAL PFL612W-U Order No. Front Load Washing Machine MODEL: PFL612W-U WARNING This service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product. Products powered by electricity should be serviced or repaired only by experienced professional technicians.
SERVICE MANUAL PFL612W-U Contents Chapter 1 1-1. General Information ________________________________________________ General Guidelines _____________________________________________________ Chapter 2 Product Feature ___________________________________________________ 2-1. Features _____________________________________________________________ 2-2. Specification __________________________________________________________ Chapter 3 3-1.
SERVICE MANUAL PFL612W-U 8-4. Joining the Inlet Hose to the Washing Machine _____________________________ 8-5. Drainage Hose ______________________________________________________ 8-6. Connecting to the Power Supply ________________________________________ Chapter 9 Wiring circuit and Self check ______________________________________ 9-1. Wiring circuit ________________________________________________________ 9-2.
SERVICE MANUAL PFL612W-U Chapter 1 General Information 1-1. General Guidelines When servicing,observe the original lead dress.If a short circuit is found, replace all parts which are overheated or damaged by the short circuit.After servicing ,see to it that all the protective devices such as insulation barriers ,insulation papers shields are properly installed .
SERVICE MANUAL PFL612W-U Chapter 2 Product Feature 2-1. Features (1). 320mm diameter porthole, door may be open at a 175 degrees. Facilitate view of wash process, facilitate unloading and easy to use with large port. (2). Class A energy-saving Scientific design for tub can reduce the use of water heavy during washing, consequently upgrade the energy efficiency class to A,also use scientific washing (3).
SERVICE MANUAL PFL612W-U 2-2. Specification PFL612W-U washing machines 1. Product identification Description of appliance Type of appliance(FS = standing, BI = built-in) Supplier own brand Supplier bar code Europe Commercial Brand / Model Commercial bar code 2. Key-Features Energy efficiency class Washing performance class Spin efficiency class Programs Capacity Spin speed (max.
SERVICE MANUAL PFL612W-U 5. 6. 7. 8.
SERVICE MANUAL PFL612W-U Chapter 3 Matters needing attention 3-1. Safety BEFORE SWITCHING THE APPLIANCE ON FOR THE FIRST TIME DO ... ... Make sure that the transportation bolt(T1,T2&T3) are removed. ... Use a separate earthed socket for the power supply. ... Make sure that the plug is accessible. ... Hold the plug and not the electric cable when unplugging the power supply. ... Make sure that the fuses in the power circuit are rated for 13A. ...
SERVICE MANUAL PFL612W-U DURING DAILY USE OF THE APPLIANCE DO ... ... Pull up zips and fix loose threads to prevent the items from being entangled. If necessary, put small items into a net bag or pillow. ... Turn off the machine after each wash program and switch it off at the mains to save electricity and for safety. Wipe clean the lower part of the porthole. ... Keep the door slightly open when the washing machine is not in use to prevent formation of odours. ...
SERVICE MANUAL PFL612W-U Chapter 4 Operational Guidance Front Load Washing Machine
SERVICE MANUAL PFL612W-U F ? Delay Button _Touch this button lightly, the washing machine will start operation after a period of time and the corresponding indicator will go on. The range is 0.5-24 hours; each touch of this button increases a half hour. After the button is set, press the Start/Pause button to start countdown of the set time (the time is displayed on the screen until the program ends).
SERVICE MANUAL PFL612W-U Chapter 5 Program Introduction Front Load Washing Machine
SERVICE MANUAL PFL612W-U Front Load Washing Machine
SERVICE MANUAL PFL612W-U Chapter 7 Appearance brief introduction 7-1.
SERVICE MANUAL PFL612W-U 7-2.
SERVICE MANUAL PFL612W-U Front Load Washing Machine
SERVICE MANUAL PFL612W-U Front Load Washing Machine
SERVICE MANUAL PFL612W-U Chapter 9 Wiring circuit and Self check 9-1.
SERVICE MANUAL PFL612W-U 9-2. Self check Self check 1.How to start Press the ° spee and °i nt ens button at the same time, then put the plug in to the socket, wait for about 3 seconds, the LED will display TEST ± nd the model of the machine ,then you can press ° st at/pause to let washing machine start test function. 2. Test item 1) when the door switch is closed for three seconds, 88:88 will be displayed. 2) when the main wash valve allows water to let in for 3 seconds, 77:77 will be displayed.
SERVICE MANUAL PFL612W-U Chapter 10 Error Display and troubleshooting 10-1. Error Display Error message:Door is not properly shut 20s after program is started. Troubleshooting: Shut the door properly Pushing the door to Check Whether Door is properly shut or not N Y Cut off the power and then turn on again. Check the voltage between brown wire and blue wire of door lock, is it between AC 220-240V? Door lock is broken and need replacing, then make sure wire is connected properly.
SERVICE MANUAL PFL612W-U Error message:Temperature sensor is not properly connected or damaged (display at the end of a program). Troubleshooting: Cut off power and measure the resistance of temperature sensor by multimeter, is it between 5-14k ? N NTC exist open circuit.
SERVICE MANUAL PFL612W-U Error message: The required water level is not reached within 8 min, or the water level exceeds the protection value Troubleshooting: Connect it well. Check if water is leaking from washer bottom. Inlet pipe. drain pipe or other pipe connection Y N Check if tap is closed or water pressure is too low (usual between0.
SERVICE MANUAL PFL612W-U Error message. Motor overheat protection or is damaged. Troubleshooting: Cut off power and check if motor wires are connected well N Reconnect well Y Measure if the resistance of motor binding by multimeter, is it as followed? 5 -10[0.755 /1.76 (at 20 C)] 8 -9[ 20 C)] / (at Put the motor in normal temperature about ten minutes, and then test again. If the resistance is natural, it is caused by overheated protection. Then check and deal with overload, abnormal voltage.
SERVICE MANUAL PFL612W-U 10-2. Examination & Troubleshooting 10-2-1. Display nothing Troubleshooting: Repair power supply Measure the power supply ,is it exists 220V-240V AC voltage N Y Press the power switch Is power switch on? N Y Press power switch and check the voltage between two pins of power switch. Is there 220-240V AC voltage? N Make sure power supply cable assembly is connected well and then replace power switch.
SERVICE MANUAL PFL612W-U 10-2-3. No draining Troubleshooting: Is the height of drain pipe too high? Adjust the height of drainpipe to 80-100 cm Y N Turn filter anticlockwise open and check if filter is jammed Clean and tighten filter clockwise. Y N Check if hose-connecting cylinder to pump is bent or jammed Y Arrange hose and clean N Turn on power and choose spin program to start.
SERVICE MANUAL PFL612W-U Troubleshooting: Check if water is leaking from the inlet pipe or the tap Readjust it Y N Is drain pipe broken Y Replace drainpipe N Check if there is foreign material nipped between cushion of sight window and sight window Y Remove clothes N Check if all tubes and tie-in is leaking water, including the connecting of tube and valve, dispenser, tube and dispenser, outer cylinder-cushion of sight window-hose and outer cylinder, drain pump and gas valve N Y Reassemble or
SERVICE MANUAL PFL612W-U Chapter 11 Maintenance Front Load Washing Machine
SERVICE MANUAL PFL612W-U Front Load Washing Machine
SERVICE MANUAL PFL612W-U Front Load Washing Machine
SERVICE MANUAL PFL612W-U Front Load Washing Machine
This document was created with Win2PDF available at http://www.daneprairie.com. The unregistered version of Win2PDF is for evaluation or non-commercial use only.
