Operation Manual

Playing a CD
1. Set the FUNCTION switch to the CD/AUX position.
• The player will scan the contents of the CD. The total number of tracks will then
be displayed.
2. The player will start by pressing .
• Playback will start from the first track and the display will show the current track
number.
• The PLAY/PAUSE indicator light will illuminate on the display.
3. Adjust the volume by turning the VOLUME control knob.
4. To interrupt playback, .
• The PLAY/PAUSE indicator light will flash on the display.
5. To resume playback, press again.
• The PLAY/PAUSE indicator light will stop flashing.
6. To stop playback, press .
• The PLAY/PAUSE indicator light will go out.
Note:
• The CD door should only be opened when the CD is in stop mode.
• If no disc is loaded into the compartment or the disc is placed upside down, the
display will show “No”.
Selecting a track
While the CD is playing, repeatedly press / to play the desired track.
Note:
• You can also repeatedly press / to select the desired track when the player
is in stop mode. Press to play the selected track.
Search function
While the CD is playing, press and hold / . Release the button when the
desired point (passage) of the track is reached.
Playback will start again from this point.
CD repeat mode
While the CD is playing, repeatedly press REPEAT to select the desired repeat mode.
REPEAT indicator light status
Description
Flashing
Stop flashing
Go out
To repeat a single track
To repeat all tracks
Normal playback
Random play
Press RANDOM. Playback will start from any track (not in the order of the disc).
The current track number and the symbol “--” will appear alternately on the display.
GB-10
Downloaded from www.vandenborre.be