Specification

22
This vacuum hose utilizes high grade, corrugated ultra-low density polyethylene. This design
oers high melting temperatures, superior exibility and high puncture & tear resistance.
The non-marking cover is abrasion resistant and crush-proof. This line is perfect for vacuum
applications.
VacuuM hoSe
Make: Low Density Polyethylene
Color: Blue
Toxicity: Non-toxic
Max Vacuum, Inches of Mercury: 29
Brittle Point: +14°F
Max. Operating Temp: +140°F
Our suction hose is designed for General purpose of suction and discharge liquid fertilizer and
granular materials. This hose is reinforced with a helical PVC stiener . It’s surface is smooth so
can be easy clamping. The clear hose call part for full visual ow monitoring.
Note: 1) Not recommended for sand or gravel suction 2) For proper use,allow liquid to ush
through hose for several minutes before using 3) When use the hose,no curvature or kinking can
be present. Keep the hose straight and balanced 4) Do not use for drinking water
SuctioN hoSe
Make: Flex and Rigid PVC
Color: White
Hardness: Shore A, Durometer, 70+/-3
Toxicity: Non-toxic
Bend Radius: 8”-4” @ +68°F
Working Pressure: 14-90psi
Brittle Point: -22°F
Max. Operating Temp: +150°F
PVC compounds reinforced with a rigid PVC spiral helix make spa-ex strong, exible and easy
to handle. It conforms to any shape or contour and is specically sized to be glued over barbs
or into standard PVC ttings. This tubing is a superior choice for spas, jetted tubs, whirlpools
or other open systems. The rugged construction makes this equally useful as a light suction or
vacuum discharge hose. Excellent di-electric strength with no breakdown, It can also be used
as a conduit to run protected electrical, cable, phone or ber optic lines Note: 1) For proper
use,allow liquid to ush through hose for several minutes before using 2) Do not installations in
continual sunlight 3) Do not leave hose under pressure when not in use 4) Do not spray water
into an electrical outlet. Severe electrical shock could result 5) Do not use for drinking water
SPa hoSe
Make: PVC with Rigid PVC Helix
Color: White
Hardness: Shore A, Durometer, 75+/-3
Toxicity: Non-toxic
Bend Radius: 4”-8” @ +68°F
Working Pressure: 14-100psi
Brittle Point: -22°F
Max. Operating Temp: +150°F
The utility hose is constructed of rugged, lightweight EPDM rubber reinforcer with synthetic
cord. It has excellent heat, ozone and weather resistance with limited oil resistance. The design
of this hose makes it a superior choice for agricultural spray and construction site applications
where strength and versatility are a must. It is also ideal for general air and water applications.
utility hoSe
Make: EPDM Rubber
Color: Red
Hardness: Shore A, Durometer, 75+/-3
Working Pressure: 200psi
Brittle Point: -40°F
Max. Operating Temp: +180°F