User manual

3. Close the door securely. There must be
an audible click.
Selecting the programme
Turn the programme selector dial to the re-
quired programme. The light
Start/
Pause starts to flash.
Selecting additional functions
1
2
34
5
You can choose from the additional func-
tions:
1.
Quick
2.
Delicate
3.
Long anti-crease
4.
Buzzer
5.
Delay Start
QUICK
By pressing this button the drying time is re-
duced in all
COTTON and SYNTHET-
ICS programmes.
DELICATE
gentle drying with reduced heat of sensitive
fabrics and temperature-sensitive textiles (e.g.
acrylic, viscose) marked on care label with:
LONG ANTI-CREASE
prolongs the anti-crease phase to 90 mins in
total. The laundry remains relaxed and free of
creases.
BUZZER
audible confirmation of:
•cycle end
• anti-crease phase start and end
• cycle interruption
• error
DELAY START
allows to delay the start of a drying pro-
gramme: 3 or 6 or 9 hours
1.
Selectthe drying programme and addition-
al drying options
2. Press the DELAY START button repeated-
ly until the desired delay start time is chos-
en
3. To activate the delay timer, press the
Start/Pause button
Starting the programme
Press Start/Pause button to start the
dryer after having selected the programme
and the options. The relevant light will stop
flashing. If the programme selector dial is
turned to another position while the ma-
chine is running, the buzzer will sound and
the programme phase indicator lights will
flash. The drum turns alternately in both di-
rections during drying.
All drying programmes end with a 10 mi-
nute cooling phase. You may remove the
laundry after this phase.
If the door of the appliance or the condens-
er door at the bottom is opened while the
programme is running, the Start/Pause but-
ton must be pressed again after closing the
door in order to restart the programme from
the point at which it was interrupted. This
button must be pressed again also after a
power failure and after having reinserted the
water reservoir, if it has been emptied in the
middle of a programme after lighting up of
light
Water reservoir.
In both cases the light of the
Start/
Pause button flashes to remind you that the
start button needs to be pressed again.
Indicator lights
These lights indicate the following functions:
•
Drying light: This light indicates that
the appliance is in the drying phase.
•
End of programme light: This light
is on at the end of the cooling phase,
during the anticreasing phase and at the
end of the programme.
28