User manual

it out. It can be positioned with the
tooth facing to the left or to the right).
After cleaning do not forget to put it
back.
4. Remove fluff from lint filter, preferably
using a damp hand for this purpose.
5. Replace the filter.
Cleaning the door
Clean periodically the interior part of the
door to remove any fluff. Accurate cleaning
ensures correct drying.
Cleaning heat exchanger
If the condenser light is on, the heat ex-
changer needs to be cleaned.
Caution! Operating when the heat
exchanger is blocked with fluff can
damage the dryer. This also increases
energy consumption. Never operate
the dryer without the heat exchanger.
1.
Open door in plinth: To do this, press
the release button on the right and
open the door in the plinth to the left.
2. Clean fluff from the inside of the door
and the heat exchanger front chamber.
Wipe the door seal with a damp cloth.
3. Turn both lock washers inwards.
4.
Use the handle to pull the heat ex-
changer out of the base and carry it
horizontally to prevent any remaining
water from spilling.
5. To empty the heat exchanger, hold ver-
tically over a washing-up bowl.
Caution! Do not use sharp objects to
clean. The heat exchanger could
develop leaks.
30