Manual

PROLiNK
®
H5004N User Manual www.prolink2u.com
Version 1.00 (Jan’10) 57
Chapter 5 Channel Mode Configuration
ADSL router supports multiple channel operation modes. This section will show procedures to configure
the router.
5.1 Bridge Mode
ADSL modem/router can be set to Bridge mode.
1. Open the WEB page at “WAN interface/Channel Configuration”.
2. Select your VPI/VCI under ATM VC table
3. Change the Channel Mode to “1483 Bridged”. Set the parameters VPI/VCI and
Encapsulation mode according to the CO DSLAM’s setting.
4. Click “Add” button to add this channel into VC table.
5. Open the WEB page at “Admin/ Commit/Reboot”. Press “Commit” to save the settings into
flash memory.
6. The new settings will take effect after reboot the system.