Installation Guide

PROLiNK PPL1202N User Manual www.prolink2u.com
Version 1.00 (Jul’10) 7 English
LED State Description
ON Powerline AP network activity.
Powerline
AP
OFF
Search or no Powerline AP network
activity.
ON Ethernet connection is OK.
Flashing Data transfer.
Ethernet
OFF No link to Ethernet.
ON Wireless Function Enable
Wireless
Flashing Data transfer.
Connector Description
RJ-45 Port
Connect to the Ethernet Cable
Secure Button
Button can auto secure and group the Powerline AP devices.
WPS: Press 1 second can enable the WPS search function.
Reset/WPS Button
Reset: Press 5 seconds can reset the device to factory default.
Standby Button
Press this button to enable the standby mode (EuP/ErP function).
This function will stop the device activities in order to save energy.
2.3 The Rear Ports
2.2 The Front LEDs