Owner's manual

Line Interactive UPS
Full Specifications
50 or 60Hz (Auto Sensing)
±25%
220/ 230/ 240VAC
Nominal Voltage
Voltage Range
Nominal Frequency
Capacity 650VA 1200
1 x 12V8.2AH 1 x 12V10AH 2 x 12V8.2AHNumber of Battery
Recharge Time (Typical)
Battery Mode – Sounding every 10 seconds
Low Battery – Sounding every second
Overload – Sounding every 0.5 seconds
Battery Replacement Alarm – Sounding every 2 seconds
Fault – Continuously Sounding
INPUT
MODELS PRO700SFC/ SFCU
850
PRO850SFCU PRO1200SFC/ SFCU
OUTPUT
BATTERY
PROTECTION
MANAGEMENT
ENVIRONMENT
PHYSICAL
INDICATION
ALARM
Support Windows® 2000/ 2003/ XP/ Vista/ 2008/ 7, Linux, Unix and MACUSB/ RS-232
LED Display
Sounding
Simulated Sinewave
Transfer Time (Typical)
Frequency
Waveform
2 - 8ms 2 - 6ms, 10ms (max)
50Hz or 60Hz ±1Hz
Full Protection Short Circuit, Overload, Discharge and Overcharge Protection
2 – 4 hours recover to 90% capacity
AC Mode – Green Lighting
Battery Mode – Yellow Lighting
Charging Mode – Green Flashing every 2 seconds
Overload – Red Flashing every 0.5 seconds
Fault – Red Lighting
±10%Output Voltage Regulation (Battery Mode)
350 x 146 x 160287 x 100 x 142
Less than 40dBANoise Level
0-90% relative Humidity, 0°C - +40°CHumidity
84.25 4.9
Dimension (mm) D x W × H
Net Weight (kgs)
*All specifications, designs and contents are subject to change without prior notice.