User Manual User Manual

PROLiNK® WNR1008 www.prolink2u.com
Version 1.00 17 English
Advanced
Item / Function
Descriptions / Instructions
Fragment Threshold
Fragmentation mechanism is used for improving the efficiency when high traffic flows along in the wireless network.
If the 802.11g MIMO Wireless Router often transmit large files in wireless network, you can enter new Fragment
Threshold value to split the packet. The value can be set from 256 to 2346. The default value is 2346.
RTS Threshold
RTS Threshold is a mechanism implemented to prevent the “Hidden Node” problem. If the “Hidden Node” problem is
an issue, please specify the packet size. The RTS mechanism will be activated if the data size exceeds the value you
set.
Warning: Enabling RTS Threshold will cause redundant network overhead that could negatively affect the throughput
performance instead of providing a remedy.
This value should remain at its default setting of 2347. Should you encounter inconsistent data flow, only minor
modifications of this value are recommended.
Beacon Interval
Beacon Interval is the amount of time between beacon transmissions. Before a station enters power save mode, the
station needs the beacon interval to know when to wake up to receive the beacon. Range 20-1024 ms, default is 100.
Preamble Type
A preamble is a signal used in wireless environment to synchronize the transmitting timing including Synchronization
and Start frame delimiter. You can select Long or Short for the preamble type.
IAPP
Select Enabled or Disabled to execute this function.
Protection
Select Enabled or Disabled to execute the security function.
Aggregation
Select Enabled or Disabled to execute this function.
Short GI
Select Enabled or Disabled to execute this function.
WLAN Partition
Select Enabled or Disabled to execute this function.
STBC
Select Enabled or Disabled to execute this function.
20/40MHz Coexist
Select Enabled or Disabled to execute this function.
RF Output Power
Select the transmitting power rate 100%, 70%, 50%, 35%, 15%.