User Manual User Manual

PROLiNK® WNR1008 www.prolink2u.com
Version 1.00 28 English
Virtual Server
Item / Function
Descriptions / Instructions
Enable Port
Forwarding
Check to enable Port Forwarding function.
IP Address
Enter the IP address in the field.
Protocol
Select the protocol (TCP, UDP or Both) used to the remote system or service.
Port Range
For TCP and UDP Services, enter the beginning of the range of port numbers used by the service. If the service uses a
single port number, enter it in both the start and finish fields.
Comment
You may key in a description MAC address.
Apply Changes
After completing the settings on this page, click Apply Changes button to save the settings.
Reset
Click Reset button to restore to default values.
Current Port
Forwarding Table
Shows the current Port Forwarding information.
Delete Selected
Click Delete Selected button to delete items which are selected.
Delete All
Click Delete All button to delete all the items.
Reset
Click Reset button to rest.