User Manual User Manual

PROLiNK® WNR1008 www.prolink2u.com
Version 1.00 3 English
CHAPTER 2: ABOUT OPERATION MODES
This device provides operational applications with Router, AP and Converter modes, which are mutually exclusive. This
device is shipped with configuration that is functional right out of the box. If you want to change the settings in order
to perform more advanced configuration or even change the mode of operation, you can MANUALLY switch to the
mode you desired by the manufacturer as described in the following sections.
2.1.
You have to MANUALLY switch the bar into the mode you preferred, Router, AP or Converter modes, then the device
will reboot automatically into the mode you have selected.
2.2.
In this mode, the device is supposed to connect to internet via ADSL/Cable Modem. The NAT is enabled and PCs in
LAN ports share the same IP address to ISP (Internet Service Provider) through WAN port. The connection type can be
setup in PPPoE, DHCP client, PPTP client, L2TP client or static IP.
The wireless connection will be set up from a point-to-point LAN into a point-to-multipoint WAN. This device
connects all the stations (PC or notebook with wireless function) to a wireless network. All stations can have the
Internet access if only the device has the Internet connection.