Use and Care Manual

Spray the surface to be cleaned.

Connect the hose to the suction side of the vacuum.

Use extraction tool #20 to scrub your surface and suck out the dirty water.

For more scrubbing power you may also use the mini head tool #25. The

extraction tool #20 will suck the most water out.

Then you’re done and that is how you shampoo your upholstery surfaces with the

Prolux Wet Dry Garage vacuum.

Cleaning and Maintenance

Unit cleaning:

Follow the steps below to get your filter, cloth filter and copper probe poles cleaned.

A. Remove the dust

bucket

B. Take out the dirt

tank and empty it.

C. Unscrew and take out the cloth filter

D. Remove and take out the cloth filter to wash

(see image below)