Use and Care Manual

If the above methods are not successful, find the clog by hand, then squeeze the

hose and shake until the debris dislodges.

Troubleshooting

1) Limited suction power:

If you find the suction power is limited or not working to capacity, follow the

steps below to fix:

a. First check the dust tank. Clean the filter and empty the dust tank.

b. After cleaning, if problem persist check for clogs.

c. If problem continues and there is no clog, replace or clean filters.

2) If appliance fails to start:

a. Pull out the plug and wait for 60 minutes.

b. Check electrical outlet to ensure power to the source.

c. Turn on the power switch.

3) Low suction and/or clog:

a. Please read section “cleaning clogs” above in the owners manual as well

as #1 above.

b. You may also use your hand to open and close suction. Increase the

airflow on the hole blocked--this may cause the object to be sucked in. Or,

use a hanger to dislodge the object.

Additional Parts that may be purchased from Prolux

Turbo Head with spinning brushroll for carpet cleaning.

Replacement hose, additional filters, extension wands, floor tools, crevice tool, duster

tool, upholstery tool, mini head, sprayer etc., may also be purchased additionally.

Technical Data

Motor Size 12 AMPS Rated voltage 120V

Rated frequency 60Hz

Power 90 CFM, 9 8 . 5

inches of water

lift.

Color White

Reservoir

volume

4 Gallons Noise ≤73dB

Warranty 3 year Motor Warranty, 2 Year Body Warranty