Use and Care Manual

Mounting the Hose & Tool Holder (fasteners included)
1.
Determine desired location for hose holder and screw supplied screw into
stud. (If mounting into drywall with no stud available, use supplied drywall
anchors.)
2.
Attach the 4 screws in the backside of the Hose & Tool holder in the 4 holes.
If you want to make the Hose & Tool Holder removable from your wall make
the screws slightly loose and the Hose & Tool Holder can unsnap from your
wall by pushing up on the Hose & Tool Holder.
3. Hang hose on unit and attach 3 of your most used tools to the 2 places where
they snap in on the outside of the Hose & Tool Holder. The rest of your tools
can be placed inside the unit.
Hanging the Unit
Hang your unit by putting the unit slots to the
mounting bracket. Mounting Bracket may look slightly
different than what is shown in the picture.
Note: Make sure the unit fits securely on the
mounting bracket and won’t fall down.
9