Use and Care Manual

16
cleaning draperies, small rugs, etc., move the suction control slide on the back of the
vacuum cleaner by increasing the opening until desired suction power is achieved.
Close for normal vacuum operation.
Note: Model 7000 full-bag indicator light will not operate while suction control is in
open position.
Replacing Headlight Bulb:
Step One: Removing the bottom plate
*Caution: First unplug the vacuum cleaner from the electrical outlet.
1. Use handle release pedal to place vacuum in Low position. Turn vacuum over
to expose underside.
2. Slide the two latches inward to release bottom plate.
Step Two: Changing the Headlight Bulb
Model 6000
1. Use any standard bayonet base appliance bulb rated 120-130 V, 15 W.
2. Remove the two frame screws.
3. Carefully lift out the entire headlight assembly.
4. Remove bulb by pushing in lightly and turning counterclockwise.