Use and Care Manual

3. Align small hole on handle with screw hole in dust cover. Insert screw and
tighten securely (All models).
4. Turn upper cord storage hook to upright position and wind cord between upper
and lower hooks for storage.
5. To quick-release cord, simply rotate upper hook downward and cord will drop
for immediate use.
!
How To Release Power Cord:
1. The upper cord storage hook has a quick-release action. To release the cord,
rotate the hook downward and the cord will drop off the handle for immediate
use.
2. Return the hook to upright position before attempting to rewind the cord.
Replacing the Dust Bag:
*Remember: Always have a dust bag installed when operating your vacuum cleaner.
Replace with a genuine dust bag when full.
1. Push down on knob at top of dust cover to open compartment.
2. Pull cardboard bag collar off holder. Remove and discard used dust bag.
3. Slide clean replacement bag collar onto holder. The bag lever must be
positioned behind bag collar. Never pull up the lever, rather, push it down with
dust bag.
4. Close dust cover by reinserting tab on end into groove on housing and snap
shut.
Checking
the
Secondary
Filter:
*Important: The
secondary filter
p r o t e c t s t h e
! 9